Abstract:
The effect of additives on corrosion behavior of Aluminium Alloy 5083
(AA5083) by using henna extract with shellac coating has been investigate with modified
henna by using 1,3-propanediamine and glycerol at 5%, 10% and 15% of henna extract
by using salt-spray test for 30 days. Start from surface preparation, produce the coating,
coating process, laboratory work, weighing and collect data lastly the laboratory analysis.
AA5083 was cut into 25mm x 25mm x 3mm and was polished manually using 600, 800
and 1200 grit of emery papers. Henna was extracted with ethanol as a solvent by using
rotary evaporator (Rotavap). To investigate the content of extraction, a Fourier Transform
Infrared Spectroscopy (FTIR) device was used. Six type of coating was produce which is
coating with 5%, 10% and 15% of native henna and modified henna. The specimens were
coated by immerse into each coating for 10 second and was dried. Specimen was coating
by 5% of native henna was set for experiment control. The corrosion behavior was
investigated using several methods which were weight loss measurement,
potentiodynamic polarization measurement, Electrochemical Impedance Spectroscopy
(EIS) and Scanning Electron Microscope (SEM). Calculations of inhibition efficiency for
weight loss shows that the results indicates that the henna extract using ethanol solvent
have good inhibition efficiency, IE(%). The value for charge transfer resistance, (Re,)
increase as a result increase the degree of protection of AA5083 in test solution and
double layer capacitance, (Cd,) decrease indicates that a layer was form indicating the
formation of a surface film. This reflects the inhibitor does retard the corrosion rate.
Image from SEM show when percentage of modified henna was increase, the corrosion
was decrease because the particle of henna extract where acts as anti-oxidant was
protecting the AA5083 surface. Extract Lawsone which is the main constituent of henna
able to protect AA5083 for this experiment.
